13.6. Rear bumper
SEDAN MODELS
Removal
| PERFORMANCE ORDER |
| 1. To lift a back part of the car and to record on supports. |
|
2. To remove inserts of an arch of a back wheel (access to inserts of an arch of a back wheel can be improved if to remove back wheels). |
| 3. To unscrew bolts of fastening of a side part of a bumper (one bolt on each party). |
| 4. Working under the bumper basis, to unscrew two lower bolts of fastening of a bumper. |
| 5. Working in the luggage compartment, to arrange the socket of illumination of registration plate near the left lamp of a backing and to disconnect the socket. |
| 6. To extend a bumper from the car and to take a plait of wires of illumination of registration plate through the condensing ring in the back panel of a body. |
|
Installation
Installation is made in the sequence, the return to removal.
KOMB MODELS
Removal
| PERFORMANCE ORDER |
| 1. To lift a back part of the car and to record on supports. |
| 2. To remove inserts of an arch of a back wheel (access to inserts of an arch of a back wheel can be improved if to remove back wheels). |
| 3. On models with the back boards under a car body located from two parties of a bumper to lower a back part of system of production of exhaust gases for access to the left back board. |
|
4. To remove back boards under a car body for access to side bolts of fastening of a bumper. |
|
5. To unscrew bolts of side fastening of a bumper (one bolt on each party of a bumper). |
|
6. To unscrew two bolts of fastening of a bumper from each party to a body and to take a bumper from the car. |
|
Installation
Installation is made in the sequence, the return to removal.
