13:31. Ceiling upholstery
Prevention
The upholstery of a ceiling is directly pasted to a body roof.
Removal
PERFORMANCE ORDER |
1. To switch-off the accumulator. |
2. By means of the crosswise screw-driver to remove antisolar peaks. |
3. On the average console of a ceiling to remove a bulb for reading and to disconnect the lighting wires placed on a ceiling. |
4. To unscrew two screws of fastening of the console. |
5. Using the small screw-driver as the lever so that not to damage plastic clips, to unhook an upholstery about a windshield and to take an upholstery from mezhdudverny intervals. |
6. To unhook a back ceiling lamp and to disconnect from it wires. To remove a ceiling lamp. |
7. By means of the flat small screw-driver to remove plastic casings of side brackets for receiving access to elements of their fastening. |
8. To remove side brackets. |
9. Using the device of supply of hot air, to gradually unstick a ceiling upholstery. |
|
Installation
PERFORMANCE ORDER |
1. On an upholstery of a ceiling to apply a thin film of glue on the basis of a neoprene. |
2. To apply a glue layer on ceiling material. |
3. To sustain minute for glue drying. |
4. To put a ceiling upholstery. Two persons have to carry out it. |
5. In case of bad placement of an upholstery from the first its movement is almost impossible. |
|