13:14. Doors


1, 2 – forward doors,
3, 4 – back doors,
5 – loop,
6, 7 – the regulating plates


These are exact and labor-consuming operations and they should be carried out together.


Hinges of a door are welded on a rack and fasten bolts to a door.

1. To remove by means of the lever plastic heads from hinged fingers.
2. Using a punch with a thin sting, to beat out a cylindrical pin from the limiter of opening of a door.
3. If at doors there are any electric elements, to remove an upholstery of a door and a protective film.
4. To disconnect sockets from electric elements and brackets of fastening.
5. To remove the rubber condensing ring from a first line of a door.
6. To take an electrical wiring from a door.
7. Supporting a door, to unscrew hinged fingers (shooter) from hinges and to remove a door. When performing this operation glass has to be lowered, and the second person has to hold doors.
8. To remove doors, paying attention not to damage a surface.


1. Installation is made in the sequence, the return to removal, at the same time hinged fingers have to be established so that their heads were directed to each other.
2. By means of the regulating plates to adjust gaps of a prileganiye of doors.

Adjustment of provision of a door (early models)

The provision of a door can be adjusted by the laying established between the hinge and a door. For addition or removal of laying it is necessary to weaken the bolts fixing the hinge to a door.