13:27. Removable elements of a body
FRONT GRILLE
Removal
| PERFORMANCE ORDER |
| 1. To open a cowl. |
|
2. To unscrew forward screws of fastening of a front grille. |
|
3. To unscrew bolts (are specified by an arrow) fastenings of the top corners of a lattice which are located over the top internal corners of headlights. |
|
4. To release a fastening bracket, then to take a pin the cowl lever fixing squeezing to a latch. |
| 5. To lift a lattice up, to disconnect the lower ledges of a lattice and to remove a front grille from the car. |
|
Installation
Installation is made in the sequence, the return to removal.
LATTICE BEFORE THE WINDSHIELD
Removal
| PERFORMANCE ORDER |
| 1. To remove levers of screen wipers. |
|
2. To disconnect a glass washer hose from the T-shaped splitter on the right side of a lattice. |
|
3. To unscrew four screws of fastening of a lattice. |
|
4. To remove a bracket, the fixing left side of a lattice. |
|
5. To take a back part of a lattice from a sealant and to remove from the car. |
|
Installation
Installation is made in the sequence, the return to removal.
SLIPS AND EMBLEMS
Slips and emblems are fixed on a body with use of a special adhesive tape.
Removal
| PERFORMANCE ORDER |
| 1. For removal of slips and emblems to heat them for a glue softening, to insert a nylon cord between a slip and a body and, moving it to the parties, to cut off a slip. |
| 2. To completely clear all traces of glue methyl alcohol. |
|
