13:21. Lock of a back door (model of Kombi)
CYLINDER OF THE LOCK OF THE BACK DOOR
Removal
PERFORMANCE ORDER |
1. To open a back door. |
|
2. To unscrew screws of fastening and to remove plastic finishing from an internal part of a back door. |
|
3. Working around edge of carpet finishing, to release brackets of fastening and to remove carpet finishing. |
|
4. To drill rivets (are specified by shooters) fastenings of the cylinder of the lock to a back door. |
5. To disconnect draft and to remove assembly of the cylinder of the lock from a back door. |
|
Installation
Installation is made in the sequence, the return to removal. At the same time it is necessary to use new rivets of fastening of the cylinder of the lock.
LOCK OF THE BACK DOOR
Removal
PERFORMANCE ORDER |
1. To open a back door. |
2. To unscrew screws of fastening and to remove plastic finishing from an internal part of a back door. |
3. Working around edge of carpet finishing, to release brackets of fastening and to remove carpet finishing. |
|
4. To unscrew two bolts (are specified by shooters) fixing the lock to an arm. |
5. To disconnect draft and to remove the lock from a back door. |
|
Installation
PERFORMANCE ORDER |
Installation is made in the sequence, the return to removal. Before installation of finishing of a back door to check operation of the lock and if it is necessary, to adjust, moving the lock within the extended openings under fastening bolts. |
|