13:19. Lock of a trunk lid (Sedan model)
TRUNK LID LOCK CYLINDER
Removal
| PERFORMANCE ORDER |
| 1. To open a trunk lid. |
| 2. To take percussion caps of fastening of an upholstery of a luggage carrier and to turn off finishing of a luggage carrier from the upper edge of the luggage compartment. |
|
3. To drill rivets (it is specified by an arrow) fastenings of the top part of exterior finish of a luggage carrier and to remove finishing. |
|
4. Working in the luggage compartment, to unscrew a bolt (it is specified by an arrow) and to disconnect draft from the lock cylinder. |
| 5. To drill rivets or to unscrew bolts and to take the lock cylinder from the body panel. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal, taking into account the next moments. |
| 2. To establish exterior finish of a luggage carrier and the cylinder of the lock with application of new rivets. |
| 3. To check operation of the lock before installation for the former place of finishing of a luggage carrier. |
| 4. To adjust position of draft of the cylinder of the lock (weakening a bolt and moving draft). |
|
TRUNK LID LOCK
Removal
| PERFORMANCE ORDER |
| 1. To open a trunk lid. |
| 2. To take percussion caps of fastening of an upholstery of a luggage carrier and to turn off finishing of a luggage carrier from the upper edge of the luggage compartment. |
| 3. To unscrew two bolts, to remove the lock and to disconnect draft. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
| 2. To check operation of the lock before installation for the former place of finishing of a luggage carrier. |
|
LOCKING PLATE OF THE LOCK OF THE TRUNK LID
The locking plate is screwed on a trunk lid by two bolts. The plate by its movement within the extended openings under a bolt is regulated.
