3.2.15. Installation of the engine

For installation of the engine it is necessary to perform operations in the return sequence in relation to its removal, and it is necessary to observe the following instructions.

1. To replace:
      – самоконтрящиеся nuts;
      – holders which are not dismantled;
      – sealing rings of power shafts (in a transmission case).
2. To adjust a tension of a belt of the drive of a servonasos of the amplifier of steering.
3. Establish power shafts.
4. Install the car on wheels and connect stabilizer connectors to levers.
5. Fill in oil in the transmission and the engine.
6. Remove air from fuel system.
7. Fill the cooling system with cooling liquid and remove air from the cooling system.