14.9. External lighting fixtures
Prevention
To disconnect a negative wire from the accumulator before removal of any lighting fixture and to repeatedly connect a negative wire to the accumulator after installation of the lighting fixture.
HEADLIGHT
Prevention
Before removal of optical knots of headlights it is necessary to designate on a wall (for example, in an underground garage) a light trace from headlights of near and far light, and also the provision of all four wheels.
Removal
| PERFORMANCE ORDER |
| 1. Working in a motor compartment, to release a bracket, the fixing cover to a back part of a headlight. |
| 2. To disconnect wires from the glow lamps located in a headlight. |
| 3. Working in a motor compartment, to disconnect the fixing spring of a lamp of the forward index of turn from a ledge. |
| 4. To take the forward index of turns from a wing. |
| 5. On models with the proofreader of light of headlights to disconnect the proofreader from a headlight as follows. |
| 6. To take the proofreader's case from a suspension bracket on the forward panel. |
|
7. To take spherical hinged connection from a nest in a back part of a headlight. |
| 8. On models with electrically the operated proofreader of light of headlights to disconnect wires from the proofreader in a back part of a headlight. |
| 9. To remove a front grille. |
|
10. To unhook the level located under a headlight, paying attention not to damage fastening about a wing edge. |
|
11. To unscrew two (are specified by an arrow) external a bolt of fastening of a headlight and to take a headlight forward from the body panel. |
|
12. To remove metal clips of fastening of glass to a headlight and to remove glass from a headlight. |
| 13. Before installation of glass of a headlight to check that the consolidation located in a flute on headlight perimeter in good shape. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
| 2. As soon as possible to adjust light of headlights. |
|
FORWARD INDEX OF TURN
| PERFORMANCE ORDER |
| 1. Working in a motor compartment, to disconnect the fixing spring of a lamp of the forward index of turn from a ledge. |
| 2. To take the forward index of turns from a wing. |
|
FORWARD SIDE REPEATER OF TURNS
| PERFORMANCE ORDER |
| To turn the forward side repeater of turns counterclockwise and to take it from a car wing. |
|
FORWARD FOG LIGHTS
Two types of headlights can be established. Headlights can be established or directly in a forward spoiler, or in the nest screwed on a forward spoiler.
| PERFORMANCE ORDER |
| The fog light established in a spoiler nest |
| 1. In a back part of a spoiler to disconnect the electric socket from a headlight. |
|
2. To unscrew two screws (are specified by an arrow) fastenings of a fog light to a spoiler, then to take a headlight with a nest from a spoiler. |
|
3. To unscrew a nut (it is specified by an arrow) fastenings in a back part of a headlight and to take a headlight from a nest. |
| 4. Installation is made in the sequence, the return to removal. |
| 5. To check and if it is necessary, to adjust light of headlights, using nuts with a nakatka in a back part of a headlight. |
| Headlight established directly in a spoiler |
Prevention
Some models are equipped with forward fog lights which have no the screws of fastening seen from headlight glass.
|
| 6. To lift a forward part of the car and to record on supports. |
| 7. To track an electrical wiring back from a fog light and to disconnect the electric socket. |
| 8. To unscrew nuts of fastening and to take a headlight from a spoiler. |
| 9. Installation is made in the sequence, the return to removal. |
|
BACK LAMP (MODELS SEDAN)
| PERFORMANCE ORDER |
| 1. To open a trunk lid. |
| 2. To squeeze two brackets of fastening and to take the holder of bulbs from a back lamp. |
| 3. To disconnect the electric socket from the holder of bulbs. |
| 4. To remove finishing of the luggage compartment. |
|
5. To unscrew nuts (are specified by shooters) fastenings of a back lamp. |
|
6. To remove a back lamp, at the same time it is necessary to take an external part of a lamp at first. |
| 7. Installation is made in the sequence, the return to removal. |
|
BACK LAMP (KOMB MODELS)
Fires of a stoplight and the index of turn are located in a back wing. Other bulbs of a back lamp are located in a back door.
| PERFORMANCE ORDER |
| 1. To open a back door. |
| 2. To turn a bracket of fastening and to open a folding shutter of a covering of the luggage compartment. |
| 3. To squeeze two brackets of fastening and to take the holder of bulbs from a back lamp. |
| 4. To disconnect the electric socket from the holder of bulbs. |
|
5. To unscrew nuts (are specified by shooters) fastenings of a back lamp. |
|
6. To unscrew nuts (are specified by shooters) fastenings of a back lamp to a door. |
|
7. To remove a back lamp. |
| 8. Installation is made in the sequence, the return to removal. |
|
ILLUMINATION OF REGISTRATION PLATE (MODEL SEDAN)
| PERFORMANCE ORDER |
|
1. To unscrew two screws (are specified by shooters) fastenings, then to take an illumination lamp from a bumper and to disconnect the electric socket. |
| 2. Installation is made in the sequence, the return to removal. |
|
ILLUMINATION OF REGISTRATION PLATE (KOMB MODEL)
| PERFORMANCE ORDER |
| 1. By means of the lever to remove a lamp of illumination of registration plate from a back door and to disconnect the electric socket. |
| 2. Installation is made in the sequence, the return to removal. |
|
