Peugeot:: 405: Combination of devices

14:11. Combination of devices

Combination of devices

1 – casing glass,
2 – payment of indexes,
3 – tachometer (or hours),

4 – speedometer,
5 – case,
6 – drive cable

MODELS TILL 1993

Removal and installation

PERFORMANCE ORDER

1. To disconnect a negative wire from the accumulator.
2. To reject a steering wheel in the lowest situation.
	3. On both sides of switches to remove overlays of screws of a casing of a combination of devices.
	4. To unscrew screws.
5. To take a casing of a combination of devices.
6. To switch-off the electric sockets connected to a combination of devices.
	7. To unscrew screws of fastening of a guard of a combination of devices.
	8. To remove the handle of the proofreader of light of headlights.
	9. To unscrew screws (are specified by shooters) a casing of a combination of devices.
	10. To remove a casing of a combination of devices.
	11. To unscrew screws (are specified by an arrow) combinations of devices.
12. To incline a little a combination of devices and to disconnect a speedometer drive cable.
13. To remove a combination of devices.
14. For installation of a combination of devices it is necessary to perform operations in the return sequence in relation to process of its removal.

MODELS SINCE 1993

Removal and installation

PERFORMANCE ORDER

1. To disconnect a negative wire from the accumulator.
2. To wring out brackets of fastening and the lower part of a casing of a combination of devices.
	3. To remove the lower part of a combination of devices.
4. To weaken the lower bolts of fastening of a steering column.
5. To unscrew two top bolts of fastening of a steering column, to disconnect all sockets and to remove a steering column.
	6. To unscrew two screws from below and one screw from above of fastening of a combination of devices.
7. In a motor compartment to remove a speedometer drive cable.
	8. To insert the soft plastic or wooden lever between the top casing and a combination of devices, to wring out a combination of devices down and to turn it on itself.
9. To disconnect wires from the back party of a combination of devices.
	10. To remove a combination of devices.
11. For installation of a combination of devices it is necessary to perform operations in the return sequence in relation to process of its removal.