e8879fe5

14:10. Adjustment of light of headlights

Headlight with the proofreader

1 – headlight case,
2 – light-scattering glass of a headlight,
3 – bulb,
4 – cylinder,
5 – tubes,
6 – proofreader,
7 – handle of management

Elements of adjustment of light of headlights

1 – screw of horizontal adjustment,

2 – screw of vertical adjustment

The correct adjustment of light of headlights is of great importance for traffic safety. Exact adjustment is possible only by means of the special device.

Before carrying out adjustment of light of headlights it is necessary to satisfy the following conditions:

  – pressure in tires has to meet standard;
  – the car has to be completely fuelled;
  – not loaded car has to have loading on a front seat of 75 kg (one person);
  – it is several times strong to rock the car that depreciation elements of a forward suspension bracket correctly were established;
  – if is available, to install adjustment of range of lighting on dashboards on 0.

Adjustment is made by rotation of the regulator located in a back part of a headlight. The external regulator changes the direction of a stream of light on height, and the internal regulator – across.

Each headlight is equipped by the proofreader of light of headlights that allows to regulate light of headlights depending on loading of the car.

THE PROOFREADER ESTABLISHED ON THE HEADLIGHT (MODEL TILL 1992)

Situation 1 – without freight.
Situation 2 – average freight.
Situation 3 – the maximum freight.

THE PROOFREADER ESTABLISHED ON THE HEADLIGHT (MODEL SINCE 1993)

Situation 1 – busy lobbies of sitting.
Situation 2 – are busy all of sitting and the luggage compartment.
Situation 3 – the driver and the luggage compartment.

THE PROOFREADER INSTALLED ON DASHBOARDS

Situation 0 – busy lobbies of sitting.
Situation 1 – are busy all of sitting.
Situation 2 – are busy all of sitting and the luggage compartment.
Situation 3 – the driver and the luggage compartment.