10.9. Check of level of oil in system of steering with the hydraulic booster
Prevention
Level of oil depends on temperature.
Check
PERFORMANCE ORDER |
1. At the idle engine to establish wheels for the movement directly forward. |
2. To check oil level in a tank. |
3. To add amount of oil so that its level was between two tags. Oil level never has to be below the sign "mini". |
|
Replacement
PERFORMANCE ORDER |
1. To put the car over a hole or on the elevator. To switch-off the accumulator. |
2. To merge oil from a hydraulic contour, having disconnected a hose of high pressure from the dividing valve. To finish discharge of oil from a contour, turning several times a steering wheel in both directions against the stop. |
3. To check whether connections of high and low pressure are well fixed. |
4. To fill in 0,3 dm3 of oil in a pump tank. |
5. At the idle engine slowly to turn a steering wheel in both directions against the stop. |
6. To add amount of oil in a tank to the required level. |
7. To start the engine. |
8. To remove air from a contour, turning several times forward wheels in both directions against the stop and adding oil in process of decrease in its level in a tank. |
|