10.2. Steering wheel
Shaft and steering wheel
1 – lower shaft, 2 – lower sealing casing, 3 – element of fastening of a casing, |
4 – the top shaft with a tubular casing, 5 – steering wheel, 6 – nut of a steering wheel |
MODELS WITHOUT SAFETY CUSHION
Removal
PERFORMANCE ORDER |
Prevention
At installation of a steering wheel on the former place it is necessary to use a new nut and a washer.
|
1. To establish wheels for the movement directly forward. |
2. By means of the lever to remove finishing of the central part of a steering wheel. |
3. To put combination tags between the end of a shaft of a steering column of management and a nave of a steering wheel. |
|
4. Using a face key with the extender to unscrew a nut of fastening of a steering wheel on several turns. |
5. Palms of hands, strongly to strike from a reverse side of a steering wheel to remove a steering wheel from shaft grooves. |
6. To finally unscrew a nut and to remove a steering wheel. |
|
Installation
Installation is made in the sequence, the return to removal.
MODELS WITH THE SAFETY CUSHION
Prevention
The control unit of a safety cushion is a component of a steering wheel.
At removal of a steering wheel it is necessary to fulfill the following requirements:
– not to throw a steering wheel;
– not to sort a steering wheel;
– not to establish a steering wheel from other model of the car (even from other Peugeot 405 models) as the control unit of a safety cushion is calibrated for each specific model.
Removal
PERFORMANCE ORDER |
Prevention
At installation of a steering wheel on the former place it is necessary to use a new nut and a washer.
|
1. To remove a safety cushion. |
2. To establish wheels for the movement directly forward. |
3. To put combination tags between the end of a shaft of a steering column of management and a nave of a steering wheel. |
4. Using a face key with the extender to unscrew a nut of fastening of a steering wheel on several turns. |
5. Palms of hands, strongly to strike from a reverse side of a steering wheel to remove a steering wheel from shaft grooves. |
6. To disconnect the electric socket from the safety cushion control unit. |
7. To finally unscrew a nut of fastening of a steering wheel. |
8. To remove a steering wheel, taking a plait of wires of a safety cushion through a steering wheel. Not to switch-off the electric socket of the control unit of a safety cushion (located in a steering wheel). |
|
Installation
PERFORMANCE ORDER |
Installation is made in the sequence, the return to removal, taking into account the next moments: – to combine the tags put before removal; – to establish a new washer and to tighten a nut of fastening of a steering wheel the required moment; – to establish a safety cushion. |
|