| 1. On XU9J4 engines with 16 valves to install the plastic support plate to an end face of a head of the block of cylinders and a drive flange.
| 2. To screw in the central bolt, previously having greased a carving with glue structure to protect a bolt from unscrewing.
| 3. To establish a distributor rotor.
|4. On engines with 8 valves to oil engine a new sealing ring and to establish it in an ignition distributor flute.
|5. To combine ledges on the distributor with dredging on distributive to a shaft and to insert the ignition distributor into a head of cylinders, slightly rotating a rotor a hand for the correct installation.
|6. To screw nuts of fastening of the distributor of ignition.
|7. To establish a protective waterproof cover.