1. If it is necessary to improve access to the ignition distributor, to remove the air stream measuring instrument. |
2. To remove a weight wire from the accumulator. |
3. To remove a protective waterproof cover from the ignition distributor. |
4. To unscrew screws of fastening of the distributor of ignition and to uncover. |
5. If necessary to remove high-voltage wires from a cover and spark plugs. |
6. On engines with 16 valves it is necessary to remove the plate closing spark plugs. |
7. On engines with 8 valves to unscrew screws of fastening of the distributor and to remove the distributor. |
|
8. On XU9J4 engines with 16 valves to unscrew three Torx-bolts fixing a rotor to a flange of the drive of a rotor and to remove a rotor. |
|
9. To unscrew a bolt from the center of a flange of the drive and to remove a flange. |
10. To remove the plastic support plate from an end face of a head of the block of cylinders. |
|
11. To uncover the distributor on the XU9J4 engine with 16 valves (1, 2, 3 and 4 – numbers of cylinders). |