13:30. Finishing of salon
CASINGS OF THE STEERING COLUMN
Removal
PERFORMANCE ORDER |
1. To remove a negative wire from the accumulator. |
2. On models with a steering column with an adjustable inclination to move the column regulator lever to the released situation. |
|
3. Working under a steering column, to unscrew five screws of fastening. |
|
4. Then to remove the lower casing of a steering column. |
5. To disconnect sockets from the regulator of illumination of the dashboard, the switch of remote control of the radio receiver, the switch a cruise control and the signaling electronic control device. |
6. To remove the top casing from a steering column. |
|
Installation
Installation is made in the sequence, the return to removal.
WARE BOX (MODELS TILL 1992)
Removal
PERFORMANCE ORDER |
1. Under a ware box to take two hinged fingers, using the thin screw-driver. |
2. To unscrew two screws fixing a back part of a cover and to uncover. |
|
Installation
Installation is made in the sequence, the return to removal.
WARE BOX (MODELS SINCE 1993)
Removal
PERFORMANCE ORDER |
|
1. Under a ware box to take two hinged fingers, using the thin screw-driver. |
|
2. To release a latch of a ware box and to take a ware box from the panel. |
|
Installation
Installation is made in the sequence, the return to removal.
CARPETS
The carpet in interior of the car consists of one part and is fixed on edge by screws and percussion caps.
Removal and installation of a carpet are very labor-consuming because it is necessary to remove all adjacent finishing of salon: seats, central console and seat belts.