e8879fe5

12:16. Unilateral valve of the vacuum amplifier of brakes

Removal

PERFORMANCE ORDER
1. To weaken a collar and to disconnect a vacuum hose from the unilateral valve of the vacuum amplifier of brakes.
2. To take the valve from rubber ring consolidation, turning it in the parties and having just pulled on itself.
3. To remove the condensing rubber ring from the vacuum amplifier of brakes.

Check

PERFORMANCE ORDER
1. To check the unilateral valve for existence of damages.
2. The valve can be checked, blowing it in two directions. Air has to pass through the valve only from the vacuum amplifier of brakes.
3. To check the rubber condensing ring and a vacuum hose for wear and damages. If necessary to replace.

Installation

PERFORMANCE ORDER
1. To establish the condensing rubber ring in the vacuum amplifier of brakes.
2. To insert the unilateral valve in the vacuum amplifier. At the same time to be careful not to damage the rubber condensing ring.
3. To connect a vacuum hose to the valve and to fix it by a collar.
4. To start the engine and to check efficiency of the vacuum amplifier of brakes.