9.5. Replacement of the intermediate bearing of the right power shaft
For removal of the bearing it is necessary to use a special stripper.
| PERFORMANCE ORDER
| 1. To remove the right power shaft.
|2. To check a condition of the bearing which has to rotate easily and evenly and should not have a side play between an internal and external ring. If necessary to replace the bearing.
|3. Using a universal stripper with the big course, to remove the intermediate bearing from a power shaft. To grease an internal ring of the new bearing and using the hammer and the corresponding tube which rests against an internal ring of the bearing, to install the new bearing on a power shaft.
|4. To check that the bearing rotated easily and evenly.