| 1. To remove the air filter. |
| 2. To remove the accumulator and its holder. |
| 3. To separate a cable of management of gear shifting from the selector lever. |
| 4. To remove the lever of the selector of the automatic transmission. |
|
| 5. To modify a standard flat lining in the sequence reflected in drawings. |
| 6. To establish the modified lining instead of the lever of the selector and to record by means of earlier unscrewed nut. |
| 7. To drill a sealing ring a drill with a diameter of 2,5 mm through small openings in a lining. It is necessary to weaken a ring and to facilitate its extraction. |
| 8. To unscrew a nut and to screw in two self-cutting the screw in big openings of a lining. |
| 9. To install special adaptation of 3084 T under the processed lining and to take a sealing ring. |
| 10. To grease a new sealing ring and to establish it by means of the plug of the corresponding diameter. |
| 11. To install the lever of the selector and to connect it to a cable of management of gear shifting. |
| 12. To establish the accumulator and its holder. |
| 13. To install the air filter. |
