Peugeot:: 405: Repair of differential

8.1.12. Repair of differential

Differential

1 – sealing ring,
2 – the regulating laying,
3 – bearings,
4 – differential box,
5 – wheel of the main transfer,

6 – sealing ring,
7 – axis of satellites,
8 – pin of fastening of an axis of satellites,
9 – laying of centering of a cogwheel

Knocking-out of a pin of fastening of an axis of satellites

Removal of the bearing from a differential box

PERFORMANCE ORDER

1. To beat out a pin of fastening of an axis of satellites, and then to remove an axis and satellites.
2. To remove a gear wheel of the main transfer. To remove bearings from a differential box, at the same time it is necessary to use a universal stripper.
3. To replace bearings on new, at the same time to use adaptation 80317 D and a press.
	4. To establish gear wheels, and then adaptation holding gear wheels from their loss. In the drawing installation of satellites with new rings of sliding is shown.
5. To establish a gear wheel of the main transfer. The facet of a gear wheel of the main transfer has to be from a differential box. Bolts should be tightened the moment of 65 Nanometers.