4.1.3. Fuel tank

Connector of a sapun of the fuel tank

8 – cover,

9 – central consolidation,

10 – hose


1. Before removal of the fuel tank, it is necessary to merge all fuel.
2. To remove system of production of exhaust gases and heat-resistant screens.
3. To remove a cable of the emergency brake.
4. To remove the electrical wiring socket from the fuel level sensor.
5. To remove on the right side of the fuel tank a pipe of a mouth and сапун. Some hoses of a sapun are connected by quick disconnect connections.
6. To remove on the right side, the giving and returnable hoses and to muffle them traffic jams.
7. A jack to prop up the fuel tank and to unscrew fastenings of the fuel tank.
8. To slowly lower the fuel tank and to remove the remained connections.


Installation is made in the sequence of the return to removal, at the same time it is necessary to check that at installation of the fuel tank, any of hoses was not pressed.