| 1. After installation of the engine in the car to check the level of oil and cooling liquid. |
| 2. To unscrew spark plugs and to disconnect system of ignition. |
| 3. To turn the engine a starter until the lamp of emergency pressure of oil goes out. |
| 4. To screw in spark plugs and to connect system of ignition. |
| 5. To start the engine and to check tightness of all systems. Smoking of the engine is the normal phenomenon as there is a burning out of the oil which got on a detail at assembly of the engine. |
| 6. On engines with 16 valves the knock of hydraulic pushers of valves before full filling with their oil will be heard. |
| 7. To check installation of a corner of an advancing of ignition and turns of idling. |
| 8. After several minutes of operation of the engine repeatedly to check levels of oil and cooling liquid. |
| 9. If new pistons, rings or inserts of a bent shaft were installed on the engine, with the engine it is necessary to handle as new and to make a running in then to replace engine oil and the filter. |
