1. To install the engine in a motor compartment. |
2. To establish on the left side an elastic support of a suspension bracket of the transmission and to tighten two nuts the moment of 17,5 Nanometers. |
3. To tighten the central nut the moment of 35 Nanometers. |
4. To establish the right arm of an engine mount and to tighten nuts the moment of 45 Nanometers. |
5. To install in the cars equipped with the hydraulic booster of system of steering: – belt tension level; – pulley of the pump of the hydraulic booster; – pipelines of the pump of the hydraulic booster. |
6. To establish and pull a belt. |
7. To establish a radiator. |
8. To connect elements of the mechanism of gear shifting and a cable of an otblokirovka of the reverse gear. |
9. To establish and adjust a coupling cable. |
10. To connect earlier turned off electric connections. |
11. To connect pipelines of the cooling system, the vacuum amplifier of brakes and fuel-supply lines. |
12. To establish an accelerator cable, knot of the air filter, the accumulator (without connecting it) and its arm. |
13. To connect a speedometer cable. |
14. To establish a reception pipe. |
15. To grease edges of a sealing ring and to establish the right half shaft in differential. |
16. To install the intermediate bearing case and to tighten bolts the moment of 25 Nanometers (at first having greased them with means of Loctite Frenetanch). |
17. To turn bolts of fastening of the bearing half way and to tighten nuts the moment of 17,5 Nanometers. |
18. To establish an arm of connection of the engine with a body. |
19. A nut from the engine to tighten the moment 35 Nanometers, and a nut from a body the moment of 45 Nanometers. |
20. To take a plastic casing of the right sealing ring. |
21. To establish the left half shaft in differential. |
22. To connect a rotary fist to levers and to tighten nuts the moment of 30 Nanometers. |
23. To establish a plastic casing of the transmission. |
24. To remove a casing of a sealing ring. |
25. To establish wheels. To lower the car on wheels. |
26. To establish connectors of the stabilizer and to tighten bolts the moment of 65 Nanometers. |
27. To fill in oil in the engine and in the transmission. |
28. To fill in cooling liquid and to remove air from the cooling system. |
29. To fill in oil in a contour of the hydraulic booster of system of steering and to remove air from a contour (in the cars equipped with the hydraulic booster of system of steering). |