e8879fe5

12:13. Main brake cylinder

Removal

PERFORMANCE ORDER
1. To remove a weight wire from the accumulator.
2. To remove a stopper from a tank of the main brake cylinder, the filter and to pump out liquid from a tank.
3. To remove levers of screenwash.
4. To remove a partition lattice under a windshield.
5. To disconnect the electric socket from the sensor of level of brake fluid.
6. To unscrew two nuts of fastening of the main brake cylinder to the vacuum amplifier.
7. To purify dirt of junctions of brake tubes to the main brake cylinder, to enclose rags under places of connections to collect the flowed-out brake fluid.
8. To unscrew nuts of fastening of brake tubes to the main brake cylinder.
9. To remove the main brake cylinder with a nutritious tank.
10. To unscrew a tightening nut and a bolt and to remove a tank from the main brake cylinder and to take sealing rings from windows of the main brake cylinder.

Repair

Repair of the main brake cylinder can be made only in the presence of a repair kit of details. At repair of the main brake cylinder to pay attention to an arrangement of all elements repeatedly to establish them on the places. At assembly of the main brake cylinder to grease all details and sealing rings with pure brake fluid.

To make repair of the main brake cylinder according to the instruction attached to a repair kit of details.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence of the return to removal taking into account the next moments.
2. If sealing rings have defects, they need to be replaced.
3. To check that connections of brake pipelines are reliably tightened.
4. To install screen wiper levers.
5. To fill in brake fluid and to remove air from the brake system.