11.1.9. Connector of the stabilizer of cross stability of a forward suspension bracket
Prevention
At installation of a connector it is necessary to use new nuts of fastening.
Removal
PERFORMANCE ORDER |
1. To lift a forward part of the car and to record on supports. To remove forward wheels. |
2. To unscrew nuts of fastening of connectors to the stabilizer and an arm of a forward suspension bracket. To take them from under the car. |
3. To check a condition of connectors for wear and damages. |
|
Installation
PERFORMANCE ORDER |
For installation of the stabilizer it is necessary to perform operations in the return sequence in relation to removal, paying attention to the correct installation of support and side basic elements. Connectors should be screwed up when the car costs on the earth. |
|