Peugeot:: 405: Stabilizer of cross stability of a forward suspension bracket

11.1.8. Stabilizer of cross stability of a forward suspension bracket

Prevention

For fastening of a connector of the stabilizer it is necessary to use new nuts.

Fastening of the stabilizer

1 – connector,

2 – lever,

3 – stabilizer

Removal

PERFORMANCE ORDER

1. To lift a forward part of the car and to record on supports. To remove forward wheels.
2. To unscrew bolts of fastening of connectors of the stabilizer to the lower levers.
	3. To unscrew nuts of fastening of connectors to the stabilizer of cross stability.
4. To apply combination tags on the stabilizer and clips of fastening of the stabilizer to the lower frame.
	5. To unscrew tightening bolts (A) and to remove clips of fastening of the stabilizer to the lower frame, at the same time it is not required to remove a metal clip (In).
6. To take the stabilizer from under the car.

Installation

Installation is made in the sequence of the return to removal.